Carbs - Quality re-manufactured / rebuilt carbs and
setups.  Specializing in Stromberg 97 / 48 / 81's
Phone: 913-244-0112
email:
rickshelton@gasalleystreetrods.
com
SuperSeat hose fitting-Only brass hose end available with the correct 18 degree seat Fits old Stromberg needle and seat, and new S-jet Also fits 9564K-BIG S-jet (standard on BIG 97 carbs) Tightens right into S-jet so no ugly threads showing Big 9/16 AF hex Perfect for 5/16in and 3/8in ID hose
$7.50
code
9080K
SuperSeat hose fitting - chromed-Only brass hose end available with the correct 18 degree seat Chromed the traditional way! Fits old Stromberg needle and seat, and new S-jet Also fits 9564K-BIG S-jet (standard on BIG 97 carbs) Tightens right into S-jet so no ugly threads showing Perfect for 5/16in and 3/8in ID hose
$11.95
code
9080K-CHR
Ford nut compression fittings x 3-Special compression fitting with 1/2 x 20 UNF thread Fits Stromberg 97, 81, 48 and 40 Pack of three, with ferrules Use only with 1/4 inch OD solid fuel line Fits most Ford flathead fuel pumps (not 1951-53 1BA pump which uses 1/8th NPT fittings)
$5.95
code
9081K
Ford Nut fittings for 5/16in line x 3 -Ford Nut compression fittings for 5/16in line. Has the correct 1/2in x 20 UNF thread for Stromberg inlet valves but must ONLY be used with Stromberg 9564K-BIG S-jet inlet valves. Regular 97 inlet valves only take 1/4in hard line.
$6.95
9081K-BIG
code
Ford Nut fittings for 5/16in line x 3 - Chrome-Ford Nut style compression fittings for 5/16in line - in chrome! Has the correct 1/2in x 20 UNF thread for Stromberg S-jet inlet valves, but must ONLY be used with Stromberg 9564K-BIG versions, as standard in all Stromberg BIG 97 carburetors, and available separately. Regular 97 inlet valves (9564K) take 1/4in hard line.
$16.95
code
9081K-BIG-C
Ford nuts - chromed-Special compression fitting with 1/2 x 20 UNF thread Chromed the traditional way! Fits Stromberg 97, 81 and 48 Pack of three, with ferrules Use with 1/4 inch OD solid fuel line Fits most Ford flathead fuel pumps (not 1951-53 1BA pump which uses 1/8th NPT fittings)
$15.95
code
9081K-CHR
Banjo fitting - single end-Media polished stainless steel banjo Recess lip on each side hides the gasket Sized to fit both 5/16inch and 3/8inch hose For safe clearance with 3x2 progressive linkage, add banjo spacer 9086K Works perfectly with 9083k - double outlet version (pictured) Fits both regular and BIG 97s Fully polished versions available
$25.95
code
9082K
Banjo fitting - single end - fits fuel gauge-Media polished stainless steel banjo 1/8th NPT threaded banjo bolt accepts fuel pressure gauge For safe clearance with 3x2 progressive linkage, add banjo spacer 9086K Sized to fit both 5/16inch and 3/8inch hose Read fuel pressure at the carb! Gauge not included! Fits both regular and BIG 97s
$30.95
code
9082K-G
Banjo fitting - single end - fits fuel gauge. Polished-Hand polished stainless steel banjo 1/8th NPT threaded banjo bolt accepts fuel pressure gauge For safe clearance with 3x2 progressive linkage, add banjo spacer 9086K Sized to fit both 5/16inch and 3/8inch hose Read fuel pressure at the carb! Perfect for your chrome 97s! Fits both regular and BIG 97s
$33.95
code
9082K-G-P
Banjo fitting - single end. Polished-Fully, machine polished stainless steel banjo Recess lip on each side hides the gasket Sized to fit both 5/16inch and 3/8inch hose Works perfectly with 9083k - double end version (pictured) For safe clearance with 3x2 progressive linkage, add banjo spacer 9086K Fits both regular and BIG 97s
$28.95
code
9082K-P
Banjo fitting - double end-Media polished stainless steel banjo Recess lip on each side hides the gasket Sized to fit both 5/16inch and 3/8inch hose For safe clearance with 3x2 progressive linkage, add banjo spacer 9086K Works perfectly with 9082k - single end version Fits both regular and BIG 97s Fully polished versions available
$29.95
code
9083K
Banjo fitting - double end - fits fuel gauge-Media polished stainless steel banjo 1/8th NPT threaded banjo bolt accepts fuel pressure gauge For safe clearance with 3x2 progressive linkage, add banjo spacer 9086K Sized to fit both 5/16inch and 3/8inch hose Read fuel pressure at the carb! Gauge not included! Fits both regular and BIG 97s
$34.95
code
9083K-G
Banjo fitting - double end - fits fuel gauge. Polished-Hand polished stainless steel banjo fitting 1/8th NPT threaded banjo bolt accepts fuel pressure gauge For safe clearance with 3x2 progressive linkage, add banjo spacer 9086K Sized to fit both 5/16inch and 3/8inch hose Read fuel pressure at the carb! Perfect for your chrome 97s! Fits both regular and BIG 97s
$37.95
code
9083K-G-P
Replacement banjo bolt - fits fuel gauge-Replaces standard banjo bolt to add a fuel pressure gauge Fit all Stromberg stainless steel banjo fittings 1/8th NPT thread fits typical pressure gauge Includes two new gaskets Bolt only - hose end fittings and gauge not included Fits both regular and BIG 97s
$16.95
code
9084K-G
Big Bore Polished Stainless fuel line 3x2-Polished fuel line for Small Block Chevy Fits Offenhauser and Edelbrock intakes at 5-1/2in carb spacing Big Bore 5/16in CNC-bent stainless lines Fuel block angle aligns with valve covers Ford Nut style compression fittings included Classic 3-into-1 shape - keeps everything on the engine 1/4NPT threads at both ends of fuel block - fittings available from Stromberg!
$159.95
code
9146-BIG-P
Big Bore Stainless fuel line 3x2 - Small Block Chevy-5-1/2in carb spacing for Small Block Chevy Fits Offenhauser and Edelbrock SBC intakes Big Bore 5/16in CNC-bent stainless lines Fuel block angle aligns with valve covers Ford Nut compression fittings included Classic 3-into-1 shape - keeps everything on the engine 1/4NPT threads at both ends of fuel block - fittings available from Stromberg! Must use 9564K-BIG S-jet intent valves (standard on Stromberg BIG 97) Use with Stromberg 9246S or 9246PRO linkage
$129.95
code
9146-BIG
Banjo fitting spacer. Polished-Spaces banjo out one inch from fuel inlet Instant clearance for 3x2 progressive linkage Proven Stromberg superseat seal into S-jet Short wrench surfaces match banjo bolt Fits single and double banjos Machine polished stainless steel Fits both regular and BIG 97s
$13.95
code
9086K-P
Banjo fitting gaskets (x10)-A pack of ten Stromberg banjo gaskets. A new material too. The same high-tech nitrile/cellulose mix that we use for our main carburetor gaskets. Fits kits 9082K and 9083K. As with any banjo, you should replace the gaskets whenever you disconnect the fitting from the carburetor. There are two gaskets to each fitting.
$4.95
code
9085K
Polished Fuel Line 2x2 - Flathead Ford and 11A pump-Fits Offenhauser 1090 intake manifold Use with Ford 11A-9350 (pepper pot) fuel pump Show polished stainless with triple chrome Ford nut fittings Accurate CNC-bent 1/4inch OD stainless steel with unique tapered T-piece Furnace brazed joints for OE looks and quality Use with Stromberg TwoStep 9241S-CHR or 9241P-CHR 2x2 linkage
$85.95
code
9141-11A-P
Polished Fuel Line 2x2 - Flathead Ford and 59A pump-Fits Offenhauser 1090 intake manifold with Ford 59A-9350 (glass bowl) fuel pump Show polished with chromed brass fittings Accurate CNC-bent 1/4inch OD lines Furnace brazed joints for OE looks and quality All stainless steel construction with unique tapered T-piece Use with Stromberg TwoStep 9241S-CHR or 9241P-CHR 2x2 linkage
$85.95
code
9141-59A-P
Polished Fuel Line 2x2 - Flathead Ford and 7RA pump-Fits Offenhauser 1075 (1949-53) intake manifold with Ford 7RA-9350 fuel pump Show polished with chromed brass fittings Accurate CNC-bent 1/4inch OD lines with furnace brazed joints for OE looks and quality All stainless steel construction with unique tapered T-piece Use with Stromberg TwoStep 9241S-CHR or 9241P-CHR 2x2 linkage
$85.95
code
9141-7RA-P
Polished Fuel Line 2x2 - Flathead Ford and remote pump-Fits all intake manifolds with 4-3/4in carb centers Show polished with chromed brass fittings Unique Stromberg fitting takes Ford fuel line or 9080K Superseat hose end (available separately) Fits Offenhauser 1090 & 1075 2x2 Regular intakes Fits Edelbrock 1103 2x2 Slingshot intake Fits Navarro 2x2 Regular intake Fits Eddie Meyer and Thickstun PM-7 2x2 High-rise intake intakes Accurate CNC-bent 1/4inch OD lines with furnace brazed joints for OE looks and quality Use with Stromberg TwoStep 9241S-CHR or 9241P-CHR 2x2 linkage Works with Holley/Edelbrock 94 style carburetors too
$95.95
code
9141-RP-P
Polished Fuel Line 3x2 - Flathead Ford and 11A pump-Fits Edelbrock 1108 3x2 intake manifold with Ford 11A-9350 (pepper pot) fuel pump Show polished with chromed brass fittings Simple Two Step installation Accurate CNC-bent 1/4inch OD lines with furnace brazed joints for OE looks and quality All stainless steel construction with unique tapered T-piece Use with Stromberg TwoStep 9245PRO-CHR 3x2 linkage
$119.95
code
9145-11A-P
Polished Fuel Line 3x2 - Flathead Ford and 59A pump-Fits Edelbrock 1108 3x2 intake manifold with Ford 59A-9350 (glass bowl) fuel pump Show polished with chromed brass fittings Simple Two Step installation Accurate CNC-bent 1/4inch OD lines with furnace brazed joints for OE looks and quality All stainless steel construction with unique tapered T-piece Use with Stromberg TwoStep 9245PRO-CHR 3x2 linkage
$119.95
code
9145-59A-P
TwoStep Fuel Line 2x2 - Flathead Ford and 11A pump-Fits Offenhauser 1090 intake manifold Use with Ford 11A-9350 (pepper pot) fuel pump Simple Two Step installation Accurate CNC-bent 1/4inch OD lines Furnace brazed joints for OE looks and quality All stainless steel construction with unique tapered T-piece Use with Stromberg TwoStep 9241S or 9241P 2x2 linkage
$59.95
code
9141-11A
TwoStep Fuel Line 2x2 - Flathead Ford and 59A pump-Fits Offenhauser 1090 intake manifold Use with Ford 59A-9350 (glass bowl) fuel pump Simple Two Step installation Accurate CNC-bent 1/4inch OD lines Furnace brazed joints for OE looks and quality All stainless steel construction with unique tapered T-piece Use with Stromberg TwoStep 9241S or 9241P 2x2 linkage
$59.95
code
9141-59A
TwoStep Fuel Line 2x2 - Flathead Ford and 7RA pump-Fits Offenhauser 1075 (1949-53) intake manifold Use with Ford 7RA-9350 fuel pump Simple Two Step installation Accurate CNC-bent 1/4inch OD lines Furnace brazed joints for OE looks and quality All stainless steel construction with unique tapered T-piece Use with Stromberg TwoStep 9241S or 9241P 2x2 linkage
$59.95
code
9141-7RA
TwoStep Fuel Line 2x2 - Flathead Ford and remote pump-Fits all intake manifolds with 4-3/4in carb centers Unique Stromberg fitting takes Ford fuel line or 9080K Superseat hose end (available separately) Fits Offenhauser 1090 and 1075 2x2 Regular intakes Fits Edelbrock 1103 2x2 Slingshot intake Fits Navarro 2x2 Regular intake Fits Eddie Meyer and Thickstun PM-7 2x2 High-rise intake intakes Accurate CNC-bent 1/4inch OD lines with furnace brazed joints for OE looks and quality All stainless steel construction with unique tapered T-piece Use with Stromberg TwoStep 9241S or 9241P 2x2 linkage Works with Holley/Edelbrock 94 style carburetors too
$69.95
code
9141-RP
Phone: 913-244-0112
email:
rickshelton@gasalleystreetrods.
com
Mr Stromberg
1/4NPT to 5/16in hard line adapter If you want to fit a 5/16in OD hard fuel line into a 1/4NPT fuel block, this is the fitting you need - perfect for the Stromberg 9146-BIG 3x2 line for Small Block Chevy.
code
9180-K
$5.95
1/4NPT to 5/16in hard line adapter. Chrome-If you want to fit a 5/16in OD hard fuel line into a 1/4NPT fuel block, this is the chrome fitting you need - perfect for the Stromberg 9146-BIG-P 3x2 line for Small Block Chevy.
$10.45
code
9180K-C